E46 330d DDE 4.0 ECU issue

[safeticar1]

Hello guys,

I have issue with my BMW E46 330d DDE 4.0 after failed coding retrofit equipment with ISTA-P. After 1min coding DDE red cross pops up  and when coding all other modules finish I did not see DDE on ISTA-P tree. After that I tried program DDE again but I had only replace option. I thought that that will resolve issue and I tried replace procedure. Procedure finished successful but now I can not program DDE (DDE is visible in ISTA-P but line is grey) - always error pops up. I tried with with ISTA-P and WINKFP. Communication error (I do not have reports - I will paste reports latter). Does somebody have idea how to solve that problem? Is there problem with my cable (I have Dcan cable) or cable settings? DDE is not even visible in ISTA D. When I use INPA to see DDE config I can see VIN and control unit numbers (7788470, 7758464, 7788469) but other informations are just some symbols....

Any help or piece of information will be appreciated.

Best regards