We have recieved 86% of our goal ..


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Retrofit adaptive xenons
#3
(09-03-2020, 11:11 PM)Tuerkay Wrote: Hi XuLeTZ,

The adaptive headlight featuer is depending on vehicle speed and steering wheel position. It uses the current position of you bulbs as absolute point to adjust the light angle. The self-leveling sensors aren´t a must but good to have.

While the light on the passengerside only moves left to right, the light on the driver side also moves down depending on your speed.

The new adaptive headlights should come with the mechanics for non-glare high-beam . they should put a shade on oncoming cars and/or cars in front of you if your kafas2 system is working properly.

you only need to VO-Code 524 to get your adaptive lights and non-glare high-beam working.

Danke, I knew the coding, was just curios if the self levelling sensors are a must, but don`t think so.
I don`t need them to go up and down when uphill or downhill.
After checking the diagram, they look plug'n play so don`t have to mess around with wiring.
Cheers mate
Don't forget to press =====>[Image: Thanks.jpg] if you think I helped
[-] The following 1 user says Thank You to XuLeTZ for this post:
  • alan
Reply


Messages In This Thread
Retrofit adaptive xenons - by XuLeTZ - 09-03-2020, 09:27 PM
RE: Retrofit adaptive xenons - by Tuerkay - 09-03-2020, 11:11 PM
RE: Retrofit adaptive xenons - by XuLeTZ - 09-04-2020, 12:01 PM



Users browsing this thread: 1 Guest(s)