09-21-2020, 04:25 AM
Take a look what ZGW you have.You need a ZGW with 8port Flexray for this retrofit. Many people overlook this.
We have recieved 86% of our goal .. | ||||||
|
||||||
VO code 5AD(LDW)
|
09-21-2020, 04:25 AM
Take a look what ZGW you have.You need a ZGW with 8port Flexray for this retrofit. Many people overlook this.
I don‘t have 8 port just 4 on F30 and I install 5AG without any problem. See with tool32 if you have 1 port free there.
Open ZGW_01.prg JOB/Wert „status_flexray_pfad“ "steuern_reset_learn_flexray" or "steuern_reset_flexray" It's about F10, not f30. Different structure of the system. 5AG on F10 is on Flexray Port 7.
10-06-2020, 04:00 PM
I have not checked what kinde of zgw I have, I know that it is the black one, will have a more close look which one.
LWD have been in the market a long time before my year modell, so hope it is the correct zgw. Siki78 thanks will have a look at this also. I have started install the sensor and only have the two cable left that has to go to zgw then its finished. Then vo coding left and so on. Thanks
03-17-2021, 12:09 PM
Hi guys, so today I coded 5AD to my car, coded Kombi,szl,icm,cic,kafas,frm,cas,jbbf, took the most that would be needed. Everything whent well until I pushed the button on the side for 5AD, and I got an error. The error when reading with ista says this codes:
030490: Steering wheel electronics module(LRE) Missing LIN slave D01903: Signal(steering wheel vibration,268.0.4) invalid, transmitted by FEM/SZL/BDC- 800A07: Vibration motor in steering wheel wheel faulty I appreciate all help
03-26-2021, 01:09 AM
Update: So found what was missing and it was 2 wires from behinde SZL to JBBF module. Now it works. Thanks guys
|
« Next Oldest | Next Newest »
|