WinKFP Problem. Please help.

[DragoMPower]

Hello friends, I have problem with winkfp, I try to flash MOSTGW but it stuck, in comfort mode when i choose my zusb 9185627 MOSTGW, it give me Hardware number 9185626 and Assembly identification number 9185627. I try in expert mode but nothing, i try to update but again nothing. Please for some help, now ccc is not working and motor spin all the time.

---

https://mega.nz/file/QbFRXbQK#kG0rBnhVMj...cOtYkd8SXc
https://mega.nz/file/BLVSmAIY#gbMHBcYQMs...AmqddQ2UQk

[TheNine90]

Its better to flash using icom and most adapter.
make sure to flash in this configuration
63
62
A0

[DragoMPower]

Its better to flash using icom and most adapter.
make sure to flash in this configuration
63
62
A0

After fail flash MOSTGW, now icom B most not repsponding, only the system bulb flashing. How to make this configuration, now i will connect again icom and most

[TheNine90]

its easier to use ista-p for flashing.
For winkfp set the ediabas to MOST_ASYNC_ab625

[DragoMPower]

its easier to use ista-p for flashing.
For winkfp set the ediabas to MOST_ASYNC_ab625

Ista-P got an error, 94025 and cant start, now most is stuck, and I dont know what to do, if you can see remotely if neccesery I will pay for it. Upload photo now to see the errors with icom next a and b connected to most. 

https://mega.nz/file/YbMWEJDA#7M3SHFr5Qs...5e96gdgArM

---

its easier to use ista-p for flashing.
For winkfp set the ediabas to MOST_ASYNC_ab625

When I reat Ident with INPA, that is show's. I think the mess is already done... need really help, there is missing modules I think.
https://mega.nz/file/4PEymJBS#Oaw1BNOuCq...g1BPcfGDGc

---

A0 and 63 is missing from Inpa, 62 not responding..

[TheNine90]

I can have a look at it remotely

[DragoMPower]

I can have a look at it remotely

The damage is done.. it's need to be bench.. I ordered new CIC now. Most just stop responding.. and cant do anything