ISTA+ 4.51.2x Install Files - MEGA

[pir0]

second link is empty. Thanx

[district]

second link is empty. Thanx

Link has been repaired

[bako]

I offer you the latest Ista version 4.51.20.
This is only the installation data!
For the installation you still need the AdminClient, Ista Launcher and a license.

I will create the license for you free of charge.



https://mega.nz/folder/F95gGCSC#PJg6Z0e-rwP7VsMS8j0uAg



For the license I need the generated file from the program
https://mega.nz/file/IOR2yAAA#kE2pzdk8pn...sLu2gifq-4

Once again for your information!

I create one license per person free of charge.
I no longer check license requests for plausibility. If street names are only filled in with numbers and Admin Client rejects your license because of this, you are out of luck!

thanks a lot

[district]

Can i get the license? Thanks in advance!

#14
02-03-2025, 09:02 PM (This post was last modified: 02-03-2025, 09:05 PM by district.)
I had already created a licence for you?

[SKris]

Can i get the license? Thanks in advance!

#14
02-03-2025, 09:02 PM (This post was last modified: 02-03-2025, 09:05 PM by district.)
I had already created a licence for you?

Unfortunately, no, because I didn’t fill out the request properly

[district]

Can i get the license? Thanks in advance!

#14
02-03-2025, 09:02 PM (This post was last modified: 02-03-2025, 09:05 PM by district.)
I had already created a licence for you?

Unfortunately, no, because I didn’t fill out the request properly

https://drive.google.com/drive/folders/1...sp=sharing

the licence was in post 14.

[manu69]

I offer you the latest Ista version 4.51.20.
This is only the installation data!
For the installation you still need the AdminClient, Ista Launcher and a license.

I will create the license for you free of charge.



https://mega.nz/folder/F95gGCSC#PJg6Z0e-rwP7VsMS8j0uAg



For the license I need the generated file from the program
https://mega.nz/file/IOR2yAAA#kE2pzdk8pn...sLu2gifq-4

Once again for your information!

I create one license per person free of charge.
I no longer check license requests for plausibility. If street names are only filled in with numbers and Admin Client rejects your license because of this, you are out of luck!

Good job thanks for sharing

[SKris]

Can i get the license? Thanks in advance!

#14
02-03-2025, 09:02 PM (This post was last modified: 02-03-2025, 09:05 PM by district.)
I had already created a licence for you?

Unfortunately, no, because I didn’t fill out the request properly

https://drive.google.com/drive/folders/1...sp=sharing
the licence was in post 14.

I didn't realize that this link was meant for me, and now it shows that everything is in the "trash"on your google drive.
Is there any chance you could still find it on your google drive  ?

[red-dragon2007]

Hallo,
Ich habe kurz eine frage, Vielleicht kann mir wer helfen?
Ich habe den AdminClient installiert und die Dateien der Lizenz unter C:\Program Files (x86)\BMW\ISPI\iLean\ISPI Admin Client eingefügt.
Beim starten des adminclient muss ich dennoch immer ein Password eingeben, was mache ich falsch?
Muss beim licenzrequest jede Zeile ausgefüllt werden? Ich habe eigentlich fast alles ausgefült, auch sinnvolles.
Gerne Hilfe per PM, ist hier ja kein Support Beitrag. Aber paar andere hatten auch bereits das Problem und scheint gelöst zu sein
Ich habe hier auch nochmal einen Lizenzrequest eingefügt, vielleicht kann ichs nochmal probieren, hab alles nun ausgefüllt? Ist auch der gleiche PC. Ich glaube, ich hätte den request auch per admin ausführen sollen.
Vielen lieben dank

[prisco1975]

Now: I havern't launched "ISTA Launcher" yet.
Why? Because I have already a licensed ISTA standalone 4.41.41 
So what's the best: uninstall all ista installations and lauch and install last version you posted via Launcher, right?

Well: I'm ready to install this new ista iLearn ispi version, removing my actual 4.41.41 standalone licensed and all other stuff. 

But I'am reading that it will install new ediabas 7.7 version and the configuration of the enet cable  (that I use on F-G series instead of the icom interface) is not possible anymore.
Someone has updated can confirm that enet is working?