03-29-2021, 01:59 PM
Hi,
I have followed the manual to flash an ecu with Esys..
But i stumble upon some errors and the flash doesnt start.
When i click check software availibilty is get 2 warnings:
-----------------------------------------------------
27 SM2 btld_000068ac-002_000_001
29 SRR btld_00007023-003_000_009
30 SRR btld_00007023-003_000_009
37 SM2 btld_000068ac-002_000_001
38 SRR btld_00007023-003_000_009
42 SRR btld_00007023-003_000_009
82 SM2 cafd_0000225a-021_007_001
84 SRR cafd_00004146-003_025_003
85 SRR cafd_00004146-003_025_003
92 SM2 cafd_00002259-021_007_001
93 SRR cafd_00004146-003_025_003
96 SRR cafd_00004146-003_025_003
54 SM2 swfl_000033e4-002_148_001
56 SRR swfl_00005ed1-002_025_000
56 SRR swfl_00005ed2-002_025_000
56 SRR swfl_00005ed0-002_025_000
57 SRR swfl_00005ed1-002_025_000
57 SRR swfl_00005ed2-002_025_000
57 SRR swfl_00005ed0-002_025_000
64 SM2 swfl_000033e4-002_148_001
65 SRR swfl_00005ed1-002_025_000
65 SRR swfl_00005ed2-002_025_000
65 SRR swfl_00005ed0-002_025_000
69 SRR swfl_00005ed1-002_025_000
69 SRR swfl_00005ed2-002_025_000
69 SRR swfl_00005ed0-002_025_000
[C385]
WARN events:
"[] Warning 1727, TAL-Lines [ibaDeploy, swDeploy, cdDeploy, fscDeploy, idRestore, hddUpdate] for ECU ECUId:SM2_0x6E were set to NOTEXECUTABLE because a necessary BL-Update is NOTEXECUTABLE, (Exception: null),
[] Warning 1727, TAL-Lines [ibaDeploy, swDeploy, cdDeploy, fscDeploy, idRestore, hddUpdate] for ECU ECUId:SRR_0x2A were set to NOTEXECUTABLE because a necessary BL-Update is NOTEXECUTABLE, (Exception: null),
[] Warning 1727, TAL-Lines [ibaDeploy, swDeploy, cdDeploy, fscDeploy, idRestore, hddUpdate] for ECU ECUId:SRR_0x28 were set to NOTEXECUTABLE because a necessary BL-Update is NOTEXECUTABLE, (Exception: null),
[] Warning 1727, TAL-Lines [ibaDeploy, swDeploy, cdDeploy, fscDeploy, idRestore, hddUpdate] for ECU ECUId:SM2_0x6D were set to NOTEXECUTABLE because a necessary BL-Update is NOTEXECUTABLE, (Exception: null),
[] Warning 1727, TAL-Lines [ibaDeploy, swDeploy, cdDeploy, fscDeploy, idRestore, hddUpdate] for ECU ECUId:SRR_0x20 were set to NOTEXECUTABLE because a necessary BL-Update is NOTEXECUTABLE, (Exception: null),
[] Warning 1727, TAL-Lines [ibaDeploy, swDeploy, cdDeploy, fscDeploy, idRestore, hddUpdate] for ECU ECUId:SRR_0x08 were set to NOTEXECUTABLE because a necessary BL-Update is NOTEXECUTABLE, (Exception: null)" [C382]
And when i click start flashing i get this:
A VCM-update after a TAL-Execution is not possible without a proper FA.
Please open an FA with appropriate VIN, if you want to update the VCM after the TAL execution.
If you don't want to update the VCM after the TAL execution, either deactivate the VCM-Update, or choose a direct ecu connection. (G310)
Well i have the full data package, and i want to flash MGU and not one of the seat modules so why the error? and how to fix this?
I have followed the manual to flash an ecu with Esys..
But i stumble upon some errors and the flash doesnt start.
When i click check software availibilty is get 2 warnings:
-----------------------------------------------------
27 SM2 btld_000068ac-002_000_001
29 SRR btld_00007023-003_000_009
30 SRR btld_00007023-003_000_009
37 SM2 btld_000068ac-002_000_001
38 SRR btld_00007023-003_000_009
42 SRR btld_00007023-003_000_009
82 SM2 cafd_0000225a-021_007_001
84 SRR cafd_00004146-003_025_003
85 SRR cafd_00004146-003_025_003
92 SM2 cafd_00002259-021_007_001
93 SRR cafd_00004146-003_025_003
96 SRR cafd_00004146-003_025_003
54 SM2 swfl_000033e4-002_148_001
56 SRR swfl_00005ed1-002_025_000
56 SRR swfl_00005ed2-002_025_000
56 SRR swfl_00005ed0-002_025_000
57 SRR swfl_00005ed1-002_025_000
57 SRR swfl_00005ed2-002_025_000
57 SRR swfl_00005ed0-002_025_000
64 SM2 swfl_000033e4-002_148_001
65 SRR swfl_00005ed1-002_025_000
65 SRR swfl_00005ed2-002_025_000
65 SRR swfl_00005ed0-002_025_000
69 SRR swfl_00005ed1-002_025_000
69 SRR swfl_00005ed2-002_025_000
69 SRR swfl_00005ed0-002_025_000
[C385]
WARN events:
"[] Warning 1727, TAL-Lines [ibaDeploy, swDeploy, cdDeploy, fscDeploy, idRestore, hddUpdate] for ECU ECUId:SM2_0x6E were set to NOTEXECUTABLE because a necessary BL-Update is NOTEXECUTABLE, (Exception: null),
[] Warning 1727, TAL-Lines [ibaDeploy, swDeploy, cdDeploy, fscDeploy, idRestore, hddUpdate] for ECU ECUId:SRR_0x2A were set to NOTEXECUTABLE because a necessary BL-Update is NOTEXECUTABLE, (Exception: null),
[] Warning 1727, TAL-Lines [ibaDeploy, swDeploy, cdDeploy, fscDeploy, idRestore, hddUpdate] for ECU ECUId:SRR_0x28 were set to NOTEXECUTABLE because a necessary BL-Update is NOTEXECUTABLE, (Exception: null),
[] Warning 1727, TAL-Lines [ibaDeploy, swDeploy, cdDeploy, fscDeploy, idRestore, hddUpdate] for ECU ECUId:SM2_0x6D were set to NOTEXECUTABLE because a necessary BL-Update is NOTEXECUTABLE, (Exception: null),
[] Warning 1727, TAL-Lines [ibaDeploy, swDeploy, cdDeploy, fscDeploy, idRestore, hddUpdate] for ECU ECUId:SRR_0x20 were set to NOTEXECUTABLE because a necessary BL-Update is NOTEXECUTABLE, (Exception: null),
[] Warning 1727, TAL-Lines [ibaDeploy, swDeploy, cdDeploy, fscDeploy, idRestore, hddUpdate] for ECU ECUId:SRR_0x08 were set to NOTEXECUTABLE because a necessary BL-Update is NOTEXECUTABLE, (Exception: null)" [C382]
And when i click start flashing i get this:
A VCM-update after a TAL-Execution is not possible without a proper FA.
Please open an FA with appropriate VIN, if you want to update the VCM after the TAL execution.
If you don't want to update the VCM after the TAL execution, either deactivate the VCM-Update, or choose a direct ecu connection. (G310)
Well i have the full data package, and i want to flash MGU and not one of the seat modules so why the error? and how to fix this?