Disable SOS

[Papachivas]

through the Ista diagnostic system it is possible to simply perform the deactivation there, go on updating in Ista and then en active equipment with complete programming and coding of the vehicle

[iyade46]

Recode Kombi, HU, ATM / TCB with added TELD to HO-Wort.

I actually did this and still have the error massage " emergency system call malfunction" I know the issue is the battery in the ATM (based on ISTA) but I dont want to remove all the upper car section since my ATM is roof mounted.

Is there anyway to just disable that massage via coding? I tried to Set ST_ECAL_ALIVE & ST_ECAL_TIMEOUT to nicht_aktiv

Adding HO-Wort TELD or coding ST_ECAL_ALIVE & ST_ECAL_TIMEOUT to nicht_aktiv will only work, if you have no ATM connected.
you can try to set "BUB_FITTED" in ATM 3001 ON_BOARD to "nicht_aktiv". this should disable the battery check.

I think it worked. its been a whole day and I did small road trip and the error never showed. thanks!!

what one you did please coz i try to add TELD to eword but esys didn't accept that i got g12 wana disable that sos fault 

[dmarctwm]

sometimes adding TELD and the codings you mentioned not enough had some cases with this problem ,only with custom coding can be fixed

[AutoExe3219]

Hi everyone,
Where can I find ATM 3001 ON_BOARD to set it "nicht_aktiv".
Have the same issue and Set ST_ECAL_ALIVE & ST_ECAL_TIMEOUT to nicht_aktiv
Appreciate the help

KOMBI