FA File

[Zombiedad]

Hi guys, 

I think I screwed up something using the E-sys software.    Does any one have the FA file for 2011 F10 535i?
I flashed the DSC and not I got ABS Brake system failed.   Can't find a way to fix it :-(
Also the Chassis Stabilization Malfunction error.

Regards
Ced

[dragosv6]

Hi guys, 

I think I screwed up something using the E-sys software.    Does any one have the FA file for 2011 F10 535i?
I flashed the DSC and not I got ABS Brake system failed.   Can't find a way to fix it :-(
Also the Chassis Stabilization Malfunction error.

Regards
Ced

Do you have a VIN?

[Zombiedad]

Hi guys, 

I think I screwed up something using the E-sys software.    Does any one have the FA file for 2011 F10 535i?
I flashed the DSC and not I got ABS Brake system failed.   Can't find a way to fix it :-(
Also the Chassis Stabilization Malfunction error.

Regards
Ced

Do you have a VIN?

Yes , it is WBAFR7C59BC608288   Thanks a lot.

---

Hi guys, 

I think I screwed up something using the E-sys software.    Does any one have the FA file for 2011 F10 535i?
I flashed the DSC and not I got ABS Brake system failed.   Can't find a way to fix it :-(
Also the Chassis Stabilization Malfunction error.

Regards
Ced

Do you have a VIN?

I have attached a screen shot.  I am new to this, never done any coding myself.   I got the Chassis Stabilization Malfunction error everytime when I start the car,  I can't switch to sport , sport +mode.    Then last night when I tried using this e-sys program,  I went to DSC (screen shot)  and using the FA file that came with the program it saids FA Sample or something.
I select F010 and it shows active.  Then i went to DSC section, right click the CAFD and coded it.    When it starts writing the code, I got the ABS error   .
Instead of trying to fix it,  I rather wait cause I have no idea I what was doing lol.   I just want to fix the problem.

Or I should right click on DSC to code the whole section?  Any help will be great. 

Right now lots of errors on dash.

[Zombiedad]

Hi guys, 

I think I screwed up something using the E-sys software.    Does any one have the FA file for 2011 F10 535i?
I flashed the DSC and not I got ABS Brake system failed.   Can't find a way to fix it :-(
Also the Chassis Stabilization Malfunction error.

Regards
Ced

Do you have a VIN?

Morning Dragosv6,   just check and see if you get a chance to find me a FA file for my 2011 F10 535i
VIN WBAFR7C59BC608288 Thanks a lot.

[dragosv6]

Hi guys, 

I think I screwed up something using the E-sys software.    Does any one have the FA file for 2011 F10 535i?
I flashed the DSC and not I got ABS Brake system failed.   Can't find a way to fix it :-(
Also the Chassis Stabilization Malfunction error.

Regards
Ced

Do you have a VIN?

Morning Dragosv6,   just check and see if you get a chance to find me a FA file for my 2011 F10 535i
VIN WBAFR7C59BC608288  Thanks a lot.

here u are!

https://mega.nz/file/9rZ0gTCZ#m0sO4SNTLr...tDd1FyZGRs

[Zombiedad]

Hi guys, 

I think I screwed up something using the E-sys software.    Does any one have the FA file for 2011 F10 535i?
I flashed the DSC and not I got ABS Brake system failed.   Can't find a way to fix it :-(
Also the Chassis Stabilization Malfunction error.

Regards
Ced

Do you have a VIN?

Morning Dragosv6,   just check and see if you get a chance to find me a FA file for my 2011 F10 535i
VIN WBAFR7C59BC608288  Thanks a lot.

here u are!

https://mega.nz/file/9rZ0gTCZ#m0sO4SNTLr...tDd1FyZGRs

---

Thanks for the file. I am new to this software.
Do I load up this FA file you sent me. Then I can update the my car modules?

[dragosv6]

First of all, what do you want to do?

[Zombiedad]

I got a chassis stabilization malfunction and can't find a way to fix it. Someone told me my module on the 2011 535i is old. I need to update the modules. So I downloaded the e-sys program and it came with the sameleF10 FA file. I clicked on it and activate. Then went to the DSC section and coded it. Then all in a sudden I got all the erros, like tire pressure monitor, ABS.. lots of faults showing on dash board. I probably did something wrong, I don't know how to really use the program. All I want is to set my car back to default like factory.
Can I use the FA you sent me ?

[Zombiedad]

First of all, what do you want to do?

I got an error when reading the FA file you sent me.