Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY)

[corruptsec]

Thanks man, going to try this!!

[belekas]

Thank you very much.

[sandres1989]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

Password is bimmerscene.com

thanksssssss

[dreni33]

thank you sir great work

[Sh4D]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

Wow thanks

[paradapa]

Thank You bro!!!

[Hrnek]

Thank you for this

[crny82]

thank you sir great  work

thank you frend

[dominator]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

---

thanks guys! you are doing awesome work!

[Dina_mit]

Что установлено?

- Inpa 5.0.6 (с файлами сценариев на английском языке и поддержкой F-серии)

- ЭДИАБАС 7.3.0

- NCS Expert (с меню и кнопками на английском языке и предустановленным профилем NCS Dummy Profile)

- Манекен NCS 4.0.1

- Инструмент32 4.0.3

- WinKFP 5.3.1

- Интегрирован SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (для использования в качестве альтернативы NCS Dummy или для обновления файлов DATEN по мере появления новых)

- Драйверы USB для кабеля

Почему это выгодно?

- Одна установка установит ВСЕ программы, необходимые для кодирования и диагностики, обновит программы, чтобы они отображали меню на английском языке, настроит NCSExpert с правильным профилем NCSDummy, автоматически установит драйверы USB и будет интегрирована с SP-DATEN 53.3 (ДА). , интегрировал!)

- Все последние версии программ в одном аккуратном установочном файле

- Никакой охоты или поиска SP-DATEN, а затем попытки импортировать их

- МАЛЕНЬКИЙ размер файла. Весь пакет весит всего 170 МБ!! Нет необходимости загружать 15 ГБ файлов DATEN.

- Переменные System Environment PATH, о которых заботится установщик

- USB-драйвер включен и автоматически установлен (и сам определил, нужен ли вам 32-битный или 64-битный драйвер)

ЕДИНСТВЕННОЕ, что может потребоваться сделать пользователям, — это перенастроить свой COM-порт на COM1 после установки, но после установки появится файл Readme с простыми инструкциями.

Особая благодарность: Stylinmike из Эдмонтона за создание необходимого инструмента для всех кодировщиков, пытающихся выполнить кодирование E Series без необходимости в массивном файле DATEN, это настолько хорошо, насколько это возможно для упрощения настройки кодирования E Series.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Пароль: bimmerscene.com.

Thanks