[SOLVED] Issue with US Sidemarkers on EU Spec E92

[souljahh]

Edit: Solved, they work as they should now 

Hey, I have been trying at this for a couple hours now - to no avail, i'm trying to enable the US Sidemarkers on my 2012 EU Spec E92.

When the engines not running, both sidemarkers stay on with daytime running lights and lowbeams, however when i turn the engine on, they start flickering and simply turn off (my front turn signals also stop working until i restart the engine).

Here's an overview of the values I've tried:
SIDEMARKER_US_MIT_FRA_V to aktiv
PWM_FRA_V_FKT_SIDEMARKER to wert_02
KALTUE_SML_M2_8_M2_32 to nicht_aktiv
WARMUE_SML_M2_8_M2_32 to nicht_aktiv
DRL_TFL_MIT_SML_3R to aktiv

my nfrm module is: FRM3_E89.C32

[eXslide89]

Hello,
it is best to write the control unit to standard with an empty .man file. US parking lights are the following parameters:
DRL_V_GEDIMMT
active
DRL_VALUE_DIMMING
value_01 slightly dimmed, dazzles
value_02 strongly dimmed

or

FRM1
[US Sidemarker]
SIDEMARKER_US
active
PWM_SIDEMARKER_BLK_V
value_01 - off
value_02 - 9.2V
value_03 - 8.2V
value_04 - 6.0V