We have recieved 86% of our goal ..


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Alpina EGS Flash for G31 - Type Code needed
#1
Hello together,

I have a BMW G31 540XD (JN71) from 02/2018 with a GA8HP75Z transmission by ZF.
I‘m planning to flash my EGS to Alpina software.

The procedure with E-Sys is clear for me (if needed I can share it).

But I would like to countercheck the type code of the Alpina counterpart. 
By research I found the information, that the Alpina D5S Touring from 2018 has the type code (Typschlüssel) 5U20, but I‘m not 100% sure and don’t want to use the wrong one. 
Can somebody confirm or correct this Information? 

Many thanks in advance!

Best regards 
Frischy
Reply
#2
(01-09-2023, 09:54 PM)Frischy1990 Wrote: Hello together,

I have a BMW G31 540XD (JN71) from 02/2018 with a GA8HP75Z transmission by ZF.
I‘m planning to flash my EGS to Alpina software.

The procedure with E-Sys is clear for me (if needed I can share it).

But I would like to countercheck the type code of the Alpina counterpart. 
By research I found the information, that the Alpina D5S Touring from 2018 has the type code (Typschlüssel) 5U20, but I‘m not 100% sure and don’t want to use the wrong one. 
Can somebody confirm or correct this Information? 

Many thanks in advance!

Best regards 
Frischy

Try this 
G31 ALPINA D5s ECE LL (J1CB)

I couldnt find any information about 5U20 are you sure it right?
Reply
#3
No I‘m not sure about 5U20. Found it on some Japanese sites.

Many thanks for the code! 
I will try it tomorrow.
Reply
#4
(01-10-2023, 08:59 PM)Frischy1990 Wrote: No I‘m not sure about 5U20. Found it on some Japanese sites.

Many thanks for the code!
I will try it tomorrow.
(01-10-2023, 06:58 PM)TheNine90 Wrote: Try this
G31 ALPINA D5s ECE LL (J1CB)

I couldnt find any information about 5U20 are you sure it right?

5U20 and J1CB are not correct typcodes for G3x cars. FP calculation will end in errors.
Alpina D5S is based on 530xd. You can use typecode JN51.
Reply
#5
Ive tried to calculate FP using the typecode(J1CB) i provided and got errors.
Try using JD11. I tested on fa from JN91 and it calculates fine.
Try calculating using both typecode and see the diffrence.

G30 530d xdrive ECE LL (JD11)
G31 530d xdrive ECE LL (JN51)
Reply
#6
Many thanks to both of you!
It did work with JN51 without any problems.
Reply
#7
Does this procedur also work on a 2018´G30 540i XDRIVE with an 8HP50 egs?
Reply
#8
No. B5 has 8HP75.
[-] The following 1 user says Thank You to TheNine90 for this post:
  • Pyro1992
Reply
#9
(05-30-2023, 08:11 AM)TheNine90 Wrote: No. B5 has 8HP75.
Okay, thanks Smile
Reply
#10
Does anyone know if possible to föash alpina egs on bmw m550i ?
And which typkey it would be for european one ?
Reply




Users browsing this thread: 1 Guest(s)