ABL-PRF-CHECK_ECU_PROGRAMMING = FAIL!

[Harkes]

Hi all

This seems to be the most knowledgable forum regarding coding hence I ask here (I really hope flatter work )?

I am getting the above error trying to program with ISTA+. Could it be because my ECU is flashed with MHD? Car is 2012 F20 M135i. Current I-level F020-15-07-506. Using ISTA+ 4.32.15.

 - Thanks, Niels

[TheNine90]

Sometime the tuning software affect the software and cant program the normally. Try restoring the stock firmware using mhd and try again. Or use esys for flashing

[Harkes]

Sometime the tuning software affect the software and cant program the normally. Try restoring the stock firmware using mhd and try again. Or use esys for flashing

Hi

I flashed car back to stock with MHD essentially removing it from the car. I now get this notification (which I believe is the same problem). Also, even though I select Advanced I cannot de-select programming the DME so I am stuck...

[TheNine90]

Flash using esys so that its on latest software then ista wont update it