Angle eyes stopped working after coding FRM on 2013 F01

[bmw1700]

The right hand side angel eyes stopped working after I coded the FRM.
I coded the following to disable front fog lights warning in the cluster:

AUSG_11_NSW_L_KALT_UEBERW_AKTIV
AUSG_11_NSW_L_WARM_UEBERW_AKTIV
AUSG_12_NSW_R_KALT_UEBERW_AKTIV
AUSG_12_NSW_R_WARM_UEBERW_AKTIV

I did some search and I found in bimmerfest forum by rentonrider that this is a known issue on F01. The solution is to code the following:

Set AE brightness to 100%. If not set to 100%, when the low beams come on, the lux go out
AE brightness: U_EFF_POL : set to wert_02

Set the cold and warm checks for DRL's to nicht_ativ
Parking Lights / DRL Cold Check Left : AUSG_04_POL_L_KALT_UEBERW_AKTIV
Parking Lights / DRL Cold Check Right : AUSG_05_POL_R_KALT_UEBERW_AKTIV
Parking Lights / DRL Warm Check Left : AUSG_04_POL_L_WARM_UEBERW_AKTIV
Parking Lights / DRL Warm Check Righ : AUSG_05_POL_R_WARM_UEBERW_AKTIV

I will try it and report if it works but what else should I do if this does not work? Anyone here had this issue before?

[that4chanhackerguy]

you ever figure this out?

[bmw1700]

you ever figure this out?

No, not yet.