Hi everyone,
This forum seems very interesting 
Hoping to share and gain some knowledge where i can ...

Regards

Nice to meet you all.
I recently started driving an F82.
I am very happy to have found this wonderful site.
I am going to study from now on.

Hi.

I am a new member of this forum and looking for usefull info and software to make my bimmer better. I own a e91 325d manual and e36 cabrio 325i.

Hello,

New member with a 2007 x3 3.0. seems like a really great community can't wait to learn.

Hello

I have been restoring a 2007 X3 (E83) N52 3.0si. I've finally got ÎŜ†Ä reinstalled and running. When I try connecting to the car with a K+DCAN cable ÎŜ†Ä is only able to connect to the DME and EGS all the other ECUs show as red (not responding) or grey. Any pointers on how I can resolve this issue? or what the problem is?

RED:
DSC
LWS
VTG
EWS
GM
IHKA_0x5B
LM_0xD0
ZAE_0xA4
RAD
KOMBI_0x80

GREY:
EGS_0X32
SM_0x72
SHD
RLS_0xE8
MFL
SES
PDC
VM-GT
DSP_0x6A
TELEFON_0x??
SZM
RDC_0x70
NAV
CIDB_0xF0

   

I have a G80 xDrive, thanks for the great community.

Attached Files

Thumbnail(s)
       

I recently installed a pre-configured CIC retrofit package into my '09 E60 M5. The person I bought the parts from on eBay "coded" the CIC head unit (also from an E60) to my VIN. I have installed everything and everything works including NAV; however, I feel that I still need to tell the car (FA/VO) that it has a CIC head unit and not a CCC. 

When I scan the car for issues using ÎŜ†Ä, it shows the CCC module as inoperable (as well as one other I can't remember). Additionally, I cannot read the CAPPL module using NCSEXPERT (which I believe is to be expected as the CCC head unit has been removed). Since the CIC head unit is already set up for my car, do I just need to add CIC to the VO and remove CCC? If so, what modules do I need to write this change to? I assume CAS, anything else?

Here is what the car has in terms of multimedia (below) - I assume I would need to remove S6VB and add S609A?

Multimedia
S609 Navigation System Professional
S610 Head-Up Display
S620 Voice Control
S639 Preparation F Mobile Phone Cpl. USA/CDN
S645 BMW US Radio
S655 Satellite Tuner
S694 Provisions For BMW 6 CD Changer
S697 Area-Code 1 For DVD
S6AA BMW TeleServices
S6AB Control, Teleservices
S6FL USB/Audio Interface
S6UH Traffic Information
S6VB CCC Assignment

Hi
Im a chiptuner
looking for some usefull software

thanks all here

Bonjour à tous merci de m'avoir accepté,
Je suis dans l'Ain (France) j'ai 53 ans et passionné de BMW

I have screwed up the F82, I should have listened to myself and stopped before I even started.

I have just tried to flash an update to my idrive firmware to HU-NBT-63 and its in stuck on a blue screen.

It was running F20 14-07-505 software from a 2014 F82. And I tried to apply F20 15-03-500, using ė-šÝ§ 3.26.1.

I did the Fem_gw first which was fine and then I did the Fem_body next which was also fine. 

But I noticed no sound so I did the hu_nbt_63 and whiist it did show a bar applying. On reboot it's stuck on the blue screen.

Thinking back I think what happened is. I flashed the fem_body without doing the 12 prerequisites. But I am at the point where I am too scared to touch it now.

Do I do the rest of the modules that are the prerequisite and hope the HU-NBT-63 comes back online, will it even allow me to upgrade the rest of the modules?

Or revert the Fem_body back to the old version if I can find the old firmware. Which is looking impossible to find.

Located in the UK. Bracknell if anyone can help.