witam czy można jakoś przywrócić connectdrive sos w europie można włączyć w bmw x3 f25 2014 z usa

Modernizacja telematyki BMW

Wycofanie ConnectedDrive dla usa 3G


Połączenie alarmowe (SOS/E-Call), w tym automatyczne powiadomienie o awarii

BMW Online i e-mobilność
MyInfo (wysłane do samochodu)
Usługi zdalne
Odzyskiwanie skradzionego pojazdu
TeleUsługi
Informacje o ruchu drogowym w czasie rzeczywistym (RTTI)
Moja aplikacja BMW

This thread can be deleted

Hello, could anybody tell me the way to code G12 from US to EU standards? Changing Typeschluss or vo and coding is safe way?

Hello all,

I am trying to code the Alpina B7 Transmission on to my G12 750 (2016) vehicle. I was following along some guides/videos from my understanding, I am to input the vehicle code base on VIN decode (7F13 for B7 in USA for G12) and the production year (which in my case I found a VIN with production year 1216). I input those into the appropriate FA subfolder group FA>FZAuftrag>Type. The default ones for my vehicle were Vehicle code 7F23 and Production 0715. ÎŜ†Ä shows I-Level at S15A-22-07-530. I am using ė-šÝ§ 3.40.2 and latest PSdZData Lite 4.39.20. The car is connected via ENET cable using the VIN target. I-step target is S15A-22-07-534.

When I right click FA and hit Calculate FP after inputting options 920 and 9XA into the SALAPA-Element folder, I get the following error: 

"No FP could be generated from FA "". [C002]
Not all elemnts of the FA were found in the FA2FP: Type code 7F13 Zeitkriterium 1216
[72]"

When reverting the Vehicle Code back to my origional 7F23 type and 0715 production date, the calculate FP runs fine, with the 920 and 9XA within the SALAPA-Element folder. I have not written anything to the FA after encounter this issue, and am curious, why am I getting this error? I'm not terribly experienced with ė-šÝ§ so forgive me if I'm missing an obvious issue.

hello from turkey i own 98 e39 528ia

interest in remap coding and flashing

Hello,

I have a FEM/ZGM were the SVT soll is missing an ecu.

I would like to update SVT soll with a new calculated SVT from the VO.

I am a little confused about how to achieve this with ėšÝ§.

Any direction would be appreciated.

Hi,


I'm Sebastian from Germany. Was on the road for a long time in the area of coding for the E38/E66, then followed a Bimmer-less time .
I have had an F02 since September and have delved deeply into the topic again and am looking forward to an exchange and help.

Best regards

Sebastian

https://mega.nz/file/37JTjTCZ#H3hN8flZta...subnetOap8 FULL

https://mega.nz/file/CmxF0BTD#b-t7xDuDEr...FxLh80S-cI LITE

deleted

Hi, my name is Gonzalo I´m from Argentina. 

Regards.