Hi Guys

Warm welcome also from my side and I'm looking forward to coding my F97 (X3M-Comp) and F40 (M135i). 

Regards,

little Bastard

hello to every one keep up good work

Here is the new Price File for ETK.


https://mega.nz/folder/y1t0CaIK#wRgNkP5mxLRX5bnTm9ATjw

Ciao a tutti,
Vivo tra due epoche, una dei carburatori e questa dell'elettronica e del digitale.
La mia età non mi impedisce di esplorare con entusiasmo ciò che possono fare le centraline del mio F32 435xi Stage 2.
Buon divertimento a tutti.
Mauritius - Maverx

Hi I tested ZF8 F90 LCI M5(Standard verion, not competition) can be flashed to M5CS EGS, the downshift when full throttle will be more aggressive, and drives better.

In ėšÝ§, change vehicle type 81CH(M5) to 71CH(M5CS), and calculate difference, flash EGS with the new calculated software, then you can test drive.

Hello to all members!

Hello guys,

I am upgrading my car with swapping hu_entry to hu_nbt.  What I did was 

In the bottom, add 609 and change 6NH to 6NS. Click apply. Calculate FP again. Save.

Go to Expert Mode >> VCM >> Load the saved FA file in the bottom section, file tab >> Right-click FA and Calculate FP >> Go to VCM Master tab >> write FA FP.

However , when I try to do VO code for HU_NBT and Kombi as those steps bellow

Expert Mode >> Coding >> Read FA (VO) >> Activate FA (VO) >> Read SVT (VCM) >> Left-Click on HU_NBT >> "Detect CAF for SWE" >> Select the latest CAFD displayed >> OK >> Right-Click on HU_NBT (the ECU itself not the underlying CAFD) => CODE


The Detect CAF for SWE is greyed out!! I'm using ėšÝ§ 3.27.1 with 4.43 pdz lite. 

Any info would be appreciated. Thanks.
################################UPDATED##############
UPDATE:

The 3.30 works for me. Thank you guys. However, it still showed BKOMBI not KOMBI. The bluetooth streaming music from phone and aux connected using usb isn't working.


Thanks.

Hey guys, any of these modules that i can flash with the engine running? I know DME, EGS and NBT can't.
Also, what modules should i flash first, the gateway module FEM_GW? or save it for last...
Thanks

hello everyone ??

Greetings to all  

Newbie here.