Hi all, I am new here I hope all go well

Good Morning

Greetings from Bavaria

Hello.
Greetings from Bulgaria.
I owned F31 330xdrive

Изпратено от моят VOG-L29 с помощта на Tapatalk

Hello guys. 
Is there anyone who knows the part numbers of BE and BF FSC Codes

Thank you in advance

There are 34 ****.rar files each 4GB.  I have a 2013 535 F10.  Do I extract all 34 files, or only a few related to the F10.

Also, if I extracted all would the directory be C:\psdzdata\v.4.24.31_PSdZData_Full.part01\..., then C:\psdzdata\v.4.24.31_PSdZData_Full.part02\..., etc

Good evening, Greetings from belgium.

Hi there guys
i installed my idrive 4 and got no signal
once i coded the vin and updated with new caf file it worked
i coded my idrive4 in with the vin and now the navigation is grey

i used the hutool 2.6 to generate the fsc codes
i put the bin file in the usb and the system did reboot itself and looks 
to be patched
now please could someone send a guide on how to load the fsc codes
generated by hutool.
thanks in advance

Greetings from Hercegovina

Hi there,

i´m planing on retrofitting an active ATM from an totaled donor. Just waiting for the CAN-Filter and some parts to finish the wiring harness.
My BMW F20 (pre-LCI /2012) already has an fitted NBT Evo id5/id6 with FSC pack. Works like a charm. Just missing RTTI and BMW Online.

To stay on the safe side, i´d like to backup my current FSC pack with my car VIN first. Is it possible to do so through ėšÝ§?

now for the Retrofit part.
i need an FSC pack matching the donor ATM (.
whats the difference between an OEM FSC pack and an Repair FSC pack?
Do both packs contain all FSCs (BMW Apps, Carplay, Navigation etc)?
Or should i just go with an full FSC pack from FemtoEVO?


thanks in advance
~Tuerkay

Hello there,

i´m currently trying to swap my Sport Line 6WA with an Black Planel 6WA, but ran into an issue.
The Black Panel has an 35128WT and my R270+ Programmer somehow can´t read it properly and i can´t remove the VIN since the dump shows no VIN.
(Tried with a SOIC Clip and with desoldering it)
i couldn´t find anything useful on the net. Most topics are about the 35160 or 35080 chips.

Is it even possible to modify the 128WT with an R270 programmer?
Could it be an Resistor issue on the Programmer?
I need to swap an resistor if i want to read/write the 35080 properly. Could it be the same with the 128WT?


Milage is no Problem since the Panel only has 20k but my car is at 100k.

thank in advance

~Tuerkay