Hola a todos, desde Alicante, España.
Saludos, estamos en contacto.

Good afternoon all,

I have a 2012 BMW E93, and when moving the passenger seat the yellow connection under the seat came disconnected. I've reconnected the cable correctly after checking for damage, but I cant seem to clear the code. This is the errors on ÏÑÞÀ.

I'm at a bit of a loss as what to do next.

Please help.

Thanks Adam

Attached Files

Thumbnail(s)
   

I know it's a long post, I'd be grateful if you read it to the end.

i used ėšÝ§ 3.30 and 4.38 psdz to update my bmw f10. i went according to the tutorial. i flashed zgw. while updating the other units by adding battery to my car, it gave an error towards the end. The car did not start, the doors did not lock, nothing worked. ÎŜ†Ä was not loaded on my laptop. i reached a person, he connected remotely. He did something from his own device, he said he would try ÎŜ†Ä, then he said he would try aicoder. He told me to start the car. everything seemed normal. according to what he told me, the psdz files were faulty. the istep version of the car still looked the same. however, the ÎŜ†Ä my mechanicman used showed the i-step version as old and said all modules were up to date. i installed ÎŜ†Ä 4.39 today. i also used 4.45 psdzdata. There were no units that could be updated in the update section. i clicked on the advanced section. i programmed the RDC module for testing purposes. it gave many error warnings on the screen. then it went away. I didn't do any encoding after programming because I was scared, the i-step version was up to date on all units after this process. But I didn't program the other units. I think my ÎŜ†Ä is not licensed, it's the free version. I don't know what to do, I don't know how the guy fixed my car. Maybe it wasn't fully updated and stock. I'm very worried. I have ėšÝ§ 3.30 and other versions, ÎŜ†Ä 4.49 and 4.50 psdz. If ėšÝ§ and ÎŜ†Ä support it, I can use 4.50. Please, I am an industrial engineer in turkey. Repairs are very expensive here. I drive my car very scared. I used to be able to use eco pro sailing mode, now it doesn't work. Please help me by connecting remotely, please leave me a contact number. After these, when I connect to ÎŜ†Ä, I get the engine tuning detected error, I don't understand why my car is not stock. Please help me by connecting remotely. I'm worried I'll break something.

I'm new to the forum, sorry if I violated any rules.

Hey everyone,

I'm hoping someone can guide me in the right direction here. I get these Crown 49hd batteries for very cheap through my employer and I'm wondering if these are safe to use in the e90 and which coding options to use for it (I have access to ÎŜ†Ä and also have the foxwell nt510 - have never had to code/register a battery yet though)?

These are the specs I can find online:


I tried to attach a photo, let me know if it works. Any help or guidance would be much appreciated.

Attached Files

Thumbnail(s)
   

[CLOSED] Please no new requests anymore.

ÍŠÞÍ ÎŜ†Ä Next 4.49.40 iLean offline Lifetime license is available free of charge until December 24, 2024.

This is my personal thank-you to all forum members. Enjoy version 4.49.40 for free.

Languages available: English and German.

Fill in the LicenseRequestFile and submit the created request file as an attached .zip file in this thread.

Free license requests should only be made in this thread. Requests sent via PM will not be considered.

Multiple license requests will be ignored.

Please note that this is not a 24-hour service. I will reply as quickly as possible.


If you appreciate this gesture, feel free to make a donation to the BIMMERSCENE Forum. Donations are entirely voluntary—any support, big or small, is greatly appreciated.

Rate + Thanks appreciated 

[CLOSED] Please no new requests anymore.

Hi, i have a problem on BMW E91 2007 318d.
After coding a battery exchange with Launch X431, FA list dissapear in CAS and FRM.When I try to use NCS Expert I got errors Coapi 2000 and BIP 0001 and my FA is blank/empty.
Is it possibpe to retrive original FA codes list from VIN?
VIN no is WBAVU11060K051597
I appreciate every help.

Hello Bimmer's

i have a 2008 BMW E60 528i N52B30AE 230hp 271Nm
i hear someone this engine can goes to 268hp 315Nm, but need to Upgrade intake manifold to 3 stage, and Software
i need a Software Flash, does anyone know how can i get it how can i flash my 528i with 3 stage intake manifold to 530i
does make any problem after Tune or not ?
i have BMW Standard Tools and ÎŜ†Ä and D-Can Cable, i have some experience and skills with it, but how can i find the flash
i was checked bimmerlabs but does not have flash for 5 series, just 3 series 328i to 330i
thanks guys .

I am trying to code my BMW with TLA. I have all of the equipment needed and I have used a cheat sheet, but I feel like I am missing something in order for it to work. I got the sheet from the BMW Coding + Retrofits + Tuning F/G Series Facebook group. If anyone can assist I would appreciate it. Thanks!

The rsa delete has to be done only once or every time i want to flash a custom tune?