Tool32 issue

[olegyjy]

Hi everyone.

Trying to verginize HU NBT 1d4 with tool32, but when open group file in Tool32, the job section is empty.
I anyone faced this kind of issue and how to fix it?

---

See attachment

[olegyjy]

Hi mate.
Before use tool32 I checked zgw search, connection is ok, same issue with any group file suitable to f30

[Alec01]

If the HU has a too recent BTLD, it can't be virginized with tool32. You will need to find another tool.

[olegyjy]

Yes, your computer did not sees the zgw! Or the enet cable is not good

Go to edianas- hardware-enet and use zgw search.

See if it finds something

Hi mate.
Before use tool32 I checked zgw search, connection is ok, same issue with any group file suitable to f30

Find then in ediabas/bin/ediabas.ini and see if on the connection you have = ENET

On the first line i think.

Don’t remember exactly how it’s the file structure cause i’m not on my laptop.

Thank you. Fixed!