Bimmer Scene - Latest BMW Coding / Retrofits / Maps

(03-28-2020, 10:37 PM)Rob Wrote: [ -> ]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

(06-05-2020, 05:46 PM)adinbu Wrote: [ -> ]

(03-28-2020, 10:37 PM)Rob Wrote: [ -> ]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

Hi all. Im fresh on this forum and im happy that there is such a good one. Can some one tell me witch version of windows should install for it.

(03-28-2020, 10:37 PM)Rob MERCI Wrote: [ -> ]

Qu'est-ce qui est installé?

- Inpa 5.0.6 (avec fichiers de script anglais et prise en charge de la série F)

- EDIABAS 7.3.0

- NCS Expert (avec menus et boutons en anglais, et NCS Dummy Profile pré-installé)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- SP-DATEN v53.3 intégré

- BMW Coding Tool v2.5.0 (à utiliser comme alternative à NCS Dummy, ou pour mettre à jour des fichiers DATEN à mesure que de nouveaux sont disponibles)

- Pilotes USB pour câble

Pourquoi est-ce avantageux?

- Une seule installation installera TOUS les programmes nécessaires pour le codage et le diagnostic, mettra à jour les programmes pour afficher les menus en anglais, configurera NCSExpert avec le bon profil NCSDummy, installera automatiquement les pilotes USB et sera intégré au SP-DATEN 53.3 (OUI , Intégré!)

- Toutes les dernières versions des programmes dans un seul fichier d'installation soigné

- Pas de chasse ou de recherche de SP-DATENs alors du mal à les importer

- PETITE taille de fichier. L'ensemble du paquet ne fait que 170 Mo !! Pas besoin de télécharger 15 Go de fichiers DATEN.

- Variables PATH de l'environnement système prises en charge par l'installateur

- Pilote USB inclus et installé automatiquement (et compris si vous avez besoin du pilote 32 bits ou 64 bits seul)

La seule chose que les utilisateurs peuvent avoir à faire est de reconfigurer leur port COM en COM1 après l'installation, mais un fichier Lisez-moi apparaît après l'installation avec des instructions simples.

Crédit spécial: pour stylinmike hors d'Edmonton pour créer un outil essentiel pour tous les codeurs essayant d'accomplir le codage de la série E sans avoir besoin d'un fichier DATEN massif, c'est aussi bon que pour la configuration du codage de la série E rendue facile.

[hide] Le contenu est caché! Veuillez vérifier le message d'origine pour le voir. [/ Hide] [/ font] [/ size] [/ color]

Le mot de passe est bimmerscene.com

(03-28-2020, 10:37 PM)Rob Wrote: [ -> ]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com