Bimmer Scene - Latest BMW Coding / Retrofits / Maps

(03-28-2020, 10:37 PM)Rob Wrote: [ -> ]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

(03-28-2020, 10:37 PM)Rob Wrote: [ -> ]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

(03-28-2020, 10:37 PM)Rob Wrote: [ -> ]

Ce este instalat?

- Inpa 5.0.6 (cu fișiere de script în limba engleză și suport pentru seria F)

- EDIABAS 7.3.0

- Expert NCS (cu meniuri și butoane în limba engleză și profil NCS Dummy preinstalat)

- NCS Dummy 4.0.1

- Instrumentul32 4.0.3

- WinKFP 5.3.1

- SP-DATEN integrat v53.3

- BMW Coding Tool v2.5.0 (pentru utilizare ca alternativă la NCS Dummy sau pentru a actualiza fișierele DATEN pe măsură ce devin disponibile altele noi)

- Drivere USB pentru cablu

De ce este acest lucru benefic?

- O singură instalare va instala TOATE programele necesare pentru codare și diagnosticare, va actualiza programele pentru a afișa meniuri în limba engleză, va configura NCSExpert cu profilul corect NCSDummy, va instala automat driverele USB și vine integrat cu SP-DATEN 53.3 (DA , Integrat!)

- Toate cele mai recente versiuni ale programelor într-un singur fișier de instalare

- Fără vânătoare sau căutare de SP-DATEN-uri, apoi se străduiește să le importe

- Mărimea fișierului MICI. Întregul pachet este de doar 170MB!! Nu este nevoie să descărcați 15 GB de fișiere DATEN.

- Variabilele PATH de mediu de sistem îngrijite de instalator

- Driver USB inclus și instalat automat (și s-a dat seama dacă aveți nevoie de driverul pe 32 de biți sau pe 64 de biți singur)

SINGURUL lucru pe care utilizatorii ar putea avea nevoie este să-și reconfigureze portul COM pentru a fi COM1 după instalare, dar un fișier Readme apare după instalare cu instrucțiuni simple.

Credit special: pentru stylinmike din Edmonton pentru crearea unui instrument esențial pentru toți programatorii care încearcă să realizeze codarea din seria E fără a avea nevoie de fișiere DATEN masive, acest lucru este la fel de bun pentru configurarea de codare a seriei E simplificată.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Parola este bimmerscene.com