Bimmer Scene - Latest BMW Coding / Retrofits / Maps

(03-28-2020, 10:37 PM)Rob Wrote: [ -> ]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

      

thx

(03-28-2020, 10:37 PM)抢 Wrote: [ -> ]

安装了什么？

- Inpa 5.0.6（带有英文脚本文件和对 F 系列的支持）

- EDIABAS 7.3.0

- NCS Expert（带有英文菜单和按钮，并预装 NCS Dummy Profile）

- NCS 虚拟 4.0.1

- 工具 32 4.0.3

- WinKFP 5.3.1

- 集成 SP-DATAN v53.3

- BMW 编码工具 v2.5.0（用作 NCS Dummy 的替代品，或在新文件可用时更新 DATEN 文件）

- 用于电缆的 USB 驱动程序

为什么这是有益的？

- 一次安装将安装编码和诊断所需的所有程序，将更新程序以显示英文菜单，将使用正确的 NCSDummy 配置文件设置 NCSExpert，将自动安装 USB 驱动程序，并与 SP-DATEN 53.3 集成（是， 融合的！）

- 在一个整洁的安装文件中包含所有最新版本的程序

- 无需寻找或搜索 SP-DATEN，然后再努力导入它们

- 小文件大小。整个包只有170MB！！无需下载 15GB 的 DATEN 文件。

- 由安装程序处理的系统环境 PATH 变量

- 包含并自动安装 USB 驱动程序（并自行确定是否需要 32 位或 64 位驱动程序）

用户可能唯一需要做的就是在安装后将他们的 COM 端口重新配置为 COM1，但安装后会弹出一个自述文件，其中包含简单的说明。

特别感谢：埃德蒙顿为所有试图在不需要大量 DATEN 文件的情况下完成 E 系列编码的编码员创建了一个必不可少的工具，这与 E 系列编码设置变得简单一样好。

[隐藏]内容已隐藏！请查看原帖查看。[/hide][/font][/size][/color]

密码是 bimmerscene.com

(03-28-2020, 10:37 PM)Rob Wrote: [ -> ]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

(03-28-2020, 10:37 PM)Rob Wrote: [ -> ]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com