Bimmer Scene - Latest BMW Coding / Retrofits / Maps

(03-28-2020, 10:37 PM)Rob Wrote: [ -> ]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

(03-28-2020, 10:37 PM)Robar Wrote: [ -> ]

¿Qué está instalado?

- Inpa 5.0.6 (con archivos de script en inglés y soporte para la serie F)

- EDIABAS 7.3.0

- NCS Expert (con menús y botones en inglés y NCS Dummy Profile preinstalado)

- NCS ficticio 4.0.1

- Herramienta32 4.0.3

-WinKFP 5.3.1

- SP-DATEN v53.3 integrado

- BMW Coding Tool v2.5.0 (para usar como alternativa a NCS Dummy o para actualizar archivos DATEN a medida que haya nuevos disponibles)

- Controladores USB para cable

¿Por qué es esto beneficioso?

- Una sola instalación instalará TODOS los programas necesarios para codificación y diagnóstico, actualizará los programas para mostrar menús en inglés, configurará NCSExpert con el perfil NCSDummy correcto, instalará automáticamente los controladores USB y viene integrado con SP-DATEN 53.3 (SÍ , ¡Integrado!)

- Todas las últimas versiones de los programas en un archivo de instalación ordenado.

- No tendrás que buscar ni buscar SP-DATEN y luego luchar para importarlos

- Tamaño de archivo PEQUEÑO. ¡¡El paquete completo tiene solo 170 MB!! No es necesario descargar 15 GB de archivos DATEN.

- Variables PATH del entorno del sistema atendidas por el instalador

- Controlador USB incluido y instalado automáticamente (y descubrí si necesita el controlador de 32 o 64 bits por sí solo)

Lo ÚNICO que los usuarios deben hacer es reconfigurar su puerto COM para que sea COM1 después de la instalación, pero aparece un archivo Léame después de la instalación con instrucciones simples.

Crédito especial: para stylinmike de Edmonton por crear una herramienta esencial para todos los programadores que intentan realizar la codificación de la Serie E sin necesidad de un archivo DATEN masivo. Esto es lo mejor que hay para facilitar la configuración de la codificación de la Serie E.

[ocultar]¡El contenido está oculto! Consulte la publicación original para verla.[/hide][/font][/size][/color]

La contraseña es bimmerscene.com

(03-28-2020, 10:37 PM)Rob Wrote: [ -> ]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

Thanks