Bimmer Scene - Latest BMW Coding / Retrofits / Maps

(09-08-2022, 08:45 PM)bmwf 11535dm Wrote: [ -> ]

(03-28-2020, 10:37 PM)Okrást Wrote: [ -> ]

Co je nainstalováno?

- Inpa 5.0.6 (se soubory anglických skriptů a podporou pro F-series)

- EDIABAS 7.3.0

- NCS Expert (s anglickými nabídkami a tlačítky a předinstalovaným NCS Dummy Profile)

- Dummy NCS 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrovaný SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (pro použití jako alternativa k NCS Dummy nebo k aktualizaci souborů DATEN, jakmile budou k dispozici nové)

- USB ovladače pro kabel

Proč je to výhodné?

- Jedna jediná instalace nainstaluje VŠECHNY programy potřebné pro kódování a diagnostiku, aktualizuje programy tak, aby zobrazovaly anglické nabídky, nastaví NCSExpert se správným profilem NCSDummy, automaticky nainstaluje ovladače USB a je integrována s SP-DATEN 53.3 (ANO , Integrovaný!)

- Všechny nejnovější verze programů v jednom přehledném instalačním souboru

- Žádné lovy nebo hledání SP-DATEN a jejich importování

- SMALL velikost souboru. Celý balíček má pouze 170 MB!! Není třeba stahovat 15 GB souborů DATEN.

- Systémové prostředí PATH proměnné, o které se stará instalační program

- Ovladač USB je součástí dodávky a automaticky se nainstaluje (a zjistí se, zda potřebujete 32bitový nebo 64bitový ovladač sám)

Jediná věc, kterou mohou uživatelé po instalaci udělat, je překonfigurovat svůj COM port na COM1, ale po instalaci se objeví soubor Readme s jednoduchými pokyny.

Zvláštní uznání: Stylinmike z Edmontonu za vytvoření základního nástroje pro všechny kodéry, kteří se snaží dosáhnout kódování řady E, aniž by potřebovali velký soubor DATEN, je to tak dobré, jak to může být pro snadné nastavení kódování řady E.

[skrýt]Obsah je skrytý! Chcete-li jej zobrazit, zkontrolujte původní příspěvek.[/hide][/font][/size][/color]

Heslo je bimmerscene.com

dík.........
dk

(03-28-2020, 10:37 PM)Rob Wrote: [ -> ]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

(03-28-2020, 10:37 PM)Rob Wrote: [ -> ]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

(03-28-2020, 10:37 PM)Rob Wrote: [ -> ]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

(10-12-2021, 10:43 PM)AZ1UNO Wrote: [ -> ]

(03-28-2020, 10:37 PM)搶 Wrote: [ -> ]

安裝了什麼？

- Inpa 5.0.6（附英文腳本檔案並支援 F 系列）

- 埃迪亞巴斯 7.3.0

- NCS Expert（附英文選單和按鈕，並預先安裝 NCS Dummy Profile）

- NCS 假人 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- 整合 SP-DATEN v53.3

- BMW Coding Tool v2.5.0（用作 NCS Dummy 的替代品，或在新文件可用時更新 DATEN 文件）

- USB 電纜驅動程式

為什麼這是有益的？

- 一次安裝即可安裝編碼和診斷所需的所有程序，將更新程序以顯示英文菜單，將使用正確的 NCSDummy 配置文件設置 NCSExpert，將自動安裝 USB 驅動程序，並與 SP-DATEN 53.3 集成（是） ，融合的！）

- 所有最新版本的程式都在一個簡潔的安裝檔中

- 無需尋找或搜尋 SP-DATEN，然後再努力匯入它們

- 檔案大小小。整個包只有170MB！！無需下載 15GB 的 DATEN 檔案。

- 由安裝程式處理的系統環境路徑變數

- 包含並自動安裝 USB 驅動程式（並自行確定您是否需要 32 位元或 64 位元驅動程式）

用戶可能需要做的唯一一件事是在安裝後將其 COM 連接埠重新配置為 COM1，但安裝後會彈出一個自述文件，其中包含簡單的說明。

特別鳴謝：來自埃德蒙頓的stylinmike 為所有試圖在不需要大量DATEN 檔案的情況下完成E 系列編碼的編碼人員創建了一個重要的工具，這對於E 系列編碼設定變得簡單來說是最好的。

[隱藏]內容已隱藏！請查看原始帖子。[/隱藏][/字體][/尺寸][/顏色]

密碼是 bimmerscene.com

      

謝謝

(03-28-2020, 10:37 PM)Rob Wrote: [ -> ]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com