Please pin this post, it my help others with G maybe F series. I use ÎŜ†Ä+ and BimmerUtility but ė-šÝ§ may be better for you. 
If you are a pro at ė-šÝ§ please make a tutorial and let it pin the post so that everyone can see there. Thank you.
Lets start with what I did and fix many issues that I found on internet.

The steps to add programing for ÎŜ†Ä+ is fallowing:

1.Install ÎŜ†Ä+ (in my case ISTA_Standalone_4.39.20) standalone without programming files
2.Unpack PSdZData (in my case v4.46.41_PSdZData.7z) to C:\EC-APPS\ÎŜ†Ä\PSdZ\data_swi....in case you don't finde data_swi create a folder.
3.Go back to the ÎŜ†Ä+ installation folder and go to "files_only_for_manual_install"
4.Run the fallowing files in order: - ISTA_firewall_rules.bat (run as Administrator) - ISTA_Reg_Fix_min_x64.reg - AppCheckDisable_to_use_different_DBs.reg
5.In the same folder you have regfiles_full_sdp_blp there you will finde ISTA_Reg_Fix_x64.reg...edit it and change the version of the PSdZData ex. "SWIData"="4.46.41"

(optional to program with ENET cable(is not recommended) see this: https://mhhauto.com/Thread-Programming-w...D-and-ENET

For G series (also F40(2019+) and F44(2020+)) cheat sheet see this: https://gizliozellikacma.com/en/bmw-chea...22-g30-etc

In BimmerUtility did the following:

BDC_BODY>CAFD_00007083_031_020_216 - Codingdata Body_appl (obd-relevant)
3120 PfInternalMirror:
-CODDT_00_SCAL_DIM_ECR_LIN     default to wert_01 (or manual werte to 20)
-CODDT_00_SCAL_DIM_ECR_LIN     default to wert_01 (or manual werte to 20)

3221 PfFesMaster:
-FesAdaptiveWorldMode0                  to Adaptive
-FesComfortWorldMode0                   to Comfort
-FesComfortWorldMode1                   to ComfortPlus
-FesComfortWorldMode2                   to ComfortIndividual
-FesEcoWorldMode0                         to EcoProEfficient
-FesEcoWorldMode1                         to EcoProPlus
-FesEcoWorldMode2                         to EcoProIndividual
-FesPiaDefaultAdaptiveWorldMode     to Adaptive
-FesPiaDefaultComfortWorldMode      to ComfortPlus (if you press the Comfort button first selection is Comfort Plus)
-FesPiaDefaultEcoWorldMode            to EcoProPlus (if you press the Eco button first selection should be Eco Pro Plus)
-FesPiaDefaultLastUserMode             to werte manual wert=05 (Every time you turn on the engine it will stay on Comfort Plus)
-FesPiaDefaultSportWorldMode          to SportExpert (if you press the Sport button first selection should be Sport Expert)
-FesSportWorldMode0                      to SportDynamic
-FesSportWorldMode1                      to SportExpert
-FesSportWorldMode2                      to SportIndividual

3420 PfSarahMaster (this is the drive assistant and the safety feature combine)
-Ampel_Assistent               to aktiv
-Ampeln                            to aktiv
-Anfahrt_Erinnerung           to aktiv
-anfahrt_verhinderung        to aktiv
-ausfahrten                       to aktiv
-einsetig_vorbeifahren        to aktiv
-engstellen_assistent          to aktiv
-gesetzesrelevanz               to GBT_LKA (to you may be different i have installed the LKA system)
-Kreuzungs_warnung          to aktiv
-seitenkollisions_warnung    to aktiv
-situativer_abstand             to aktiv
-speedlimit_change_warnung  to aktiv (this one if its annoying you can deactivate in the car section speed assistant at drive assistant settings, i find it very good that if you pass a speed                                              change limit and you didn't saw it or you did not see it on dashboard it make a substile noise that it change the speed limit. try it you will be amazed)
-speedlimit_info                  to gen_2
-speedlimit_inszenierung     to aktiv
-speedlimit_warnung           to aktiv
-spurverlassens_lenkeingriff  to aktiv
-spurverlassens_warnung     to gen_2 (if you chose gen 3 then you have the issue where you need to turn off the lame departure intervention every damm time when you turn on the                                               engine but somehow is not that agressive with holding you in lame)
-spurwechsel_assistant        to aktiv
-spurwechsel_Lenkeingriff    to aktiv
-spurwechsel_warnung        to aktiv
-stoppschilder                     to aktiv
-strecken_verlauf                to aktiv
-uebernahme_geschwindigkeit to aktiv
-voffset                              to gen_2
-voffset_langsam                 to gen_2
-vorausschau                      to aktiv
-wiederanfahren                  to aktiv

DKOMBI4 (i have also HUD installed)
in search bar i write hud and everything related like navi, speed limit, radio, infotainment, entertainment, abstandsinfo, tempolimit, listen (not list) change to aktiv
then in search bar i write segel and everything in section 3000 Anzeige_Konfiguration with segel and segeln to aktiv

HU_MGU
3001 Connectivity_A4A
A4A_android                    to aktiv
A4A_voice_app_support    to aktiv
A4A_wireless_android       to aktiv
A4A_wireless_ios              to aktiv

3002 AUDIO_BROADCAST
audio_system      to alev4_ram (i do not have B&W but i get the option of the sound customizer like EQ and option to use studio mode or concert mode)

3008 FES
everything beside msa, electric, EDRIVE, HYBRID, and x mode is on aktiv

300A SARAH
all that start with ad_ to aktiv
-ampelassistent          to gen 2 (if you have gen 1 it shows in menu to select the traffic lights but if is gen 2 its automatically inside and where its recognizing the traffic lights it gonna                                      show you in dashboard, test it)
-ampeln                          to gen 1
-anfahrerinnerung            to gen 1
-anfahrverhinderung         to gen 1
-auffahrwarnung               to gen 2
-ausfahten                       to gen 1
-autolimiter                      to gen 1
-autotempomat                 to gen 1
-einseitigvorbeifahren        to gen 1
-engstellenassistent           to gen 1
-engstellenbreite               to gen 1
-frontkollisionswarrnung     to gen 1
-geschwindigkeitsassistent  to gen 1
-gezieltesanleuchten           to gen 1
-highwaypilot                     to aktiv
-individual_info                  to gen 2
-inszenierung                     vollkonzept_2
-kreuzungswarnung            to gen 1
-lenkassistent_dcs              to gen 1
-lenkassistent_plus             to aktiv
-personenwarnung_tags and nachts to gen 1
-rettungsgasse                   aktiv
-seitenkollisionswarnung     to gen 1
-situativerabstand               to gen 1
-slaautomatisch                  to gen 1
-slamanuell                        to gen 1
-speedlimit_akustische_warnung to aktiv
-speedlimitinfo                    to gen 1
-speedlimitinszenirung         to gen 1
-speedlimitwarnung             to gen 3
-spurverlassenslenkeingriff    to gen 2
-spurverlassenswarnung       to gen 3
-spurverlassenswarnung_generation to gen 5
-spurverlassenswarnzeitpunkt  to gen 2
-spurwechselassistent             to gen 1
-spurwechsellenkeingriff          to gen 2
-spurwechselwarnung              to gen 3
-spurwechselwarnzeitpunkt      to gen 2
-stopschilder                           to gen 1
-streckenverlauf                      to gen 1 (this is weird its should slow down according to the curve of the street but mostly of the time does not)
-streckenverlauf_generation     to gen 1
-vmin_seitenkollision_kmh or in your case mph     to p_00 (this is the minimum kmh/mph to activate the warning and the intervention of the steering if a car of bike is passing near you)
-vmin_spurverlassen_kmh or in your case mph     to p_00 (this is the minimum kmh/mph to activate the warning and the intervention of the steering if you pass the road lines or road                                                                             edge)
-vmin_spurwechsel_kmh or in your case mph       to p_00 (this is the minimum kmh/mph to activate the warning and the intervention of the steering if a car of bike is passing near you)
                                          Those 3 options above is maybe annoying but if you live in a city where are a lot of incompetent drivers or a lot of bikers its very helpful because most of                                                 accidents happens under 30 kmh where this feature not turning on. 
-voffset                                to gen 2
-voffset_langsam                   to gen 2
-vorausschau                        to gen 1
-vorfahrtswarnung                 to gen 2
-wiederanfahren                    to gen 1

SAS3
in the search bar write segeln and choose Nr001 and at topologie you choose what type you have dcc or acc or both if you have. (acc=assistant cruse control....dcc=dynamic cruse control)

I may update it with the time

Can someone explain how to install FSC list in HU_MGU?

Thank you in advance.

Hello everyone, nice to meet you all.

I am from Romania, and for almost a year I have a wonderful BMW g21 320d.
By trade I am a DevOps, but I like to service my cars myself, same with any programing related tasks.
I joined this forum because many of you seem very friendly and I have also saw a lot of discussions regarding bimmerutility which I plan on buying
Hopefully, y'all be patient with my questions as I am very new to BMWs, besides changing the oil in my engine and in the gearbox(i am proud n this one) it is still a black box to me .


TL;Dr New user, eager to learn a lot about his own car, and the way BMW does diagnose and coding.

A message to see if anybody here has experience with using Tool32 to code a Bosch 5.7 ABS ECU.

The 02-05 L322 Range Rover shares many mechanical and electrical / electronic components, an you can use EDIABAS/ÏÑÞÀ/TOOL32 to communicate with the RR L322 systems.

NCS and other software will not work as it is VIN dependent.

My problem is - I have a replacement 5.7 ABS ECU for my 03 L22 with a M62 V8 which originally was in the same vintage RR L322 with a M57 diesel motor.

There is a guide on the RR forums which gives instructions on using Tool32 to change the coding from M62 V8 to M57 diesel using Tool32.



fullfatrr.com - View topic - Coding ABS module



Abridged instructions:

Start tool32

Load SGBD file DSC_L30 (for the L322 Bosch 5.7 ABS ECU) (the E53 is DSC_5.7)

Select Job "coden_schreiben"

In the "arguments" box enter 07,E0 - the hexidecimal codes

Double click on  "coden_schreiben" to execute job



There is no corresponding argument for changing from M57 diesel to M62 V8.



So what is the format for the argument syntax? There may be a clue in NCS Dummy where you  can choose an E53 chassis and DSC ECU - and the choices  for the engine type are 01 to 10.

01 and 06 are the M62

02 03 07 08 are  the m57

-the M57 is 07 - so is that the hex code for the M57 diesel?

Change hex code 07 to 01  or  06?

What is the function of hex code E0?



I have been able to read the contents of the ABS eeprom and I should have a copy of a M62 V8 DSC ECU soon so I can compare the hex codes for the difference.

but I still need the correct argument hex codes.

-Thanks.

Attached Files

Thumbnail(s)
   

  download eeprom.txt (Size: 1.34 KB / Downloads: 3)

Hello to all from Greece!!

Proud owner of E93, f900xr and F55!

Regards!

Hey guys one of my first post here since a few so if im not posting in the right place let me know.

so long story short friend of mine seems to have multiple problem with his f30 such as when he triple press the push to star car doesnt "stop" no more beeps when unlocking car and other problems as well.

I'm wondering if maybe just a full restore of all the cafd and maybe updating them would work? I believe if i remember correctly there is such an option in bimmerutility right?

Also he changed his driver seat for a racing seat and now has the airbag light as well. how can i reset/remove the light.

Thank you in advance for your help !!

EDIT :
I also have ė-šÝ§ and ÎŜ†Ä if for whatever reason it's needed to do any of the problem listed above.

new member, F30 335d, let's get revving 

Hello , need licence for ÎŜ†Ä 4.47.18 standalone
I'll be happy to buy it

Hi all,


My name is Maxim, from Belgium. 
My daily driver is an E61 523i (N53) that I know inside and out, the car that had me learn ancient BMW computers and more German than I would have liked.
Now looking to upgrade to a G31 530e, quite the jump in technology and another set of computer systems I need to get acquainted with.
I hope I can learn a lot here, and contribute back where possible.

Hi everyone,
I'm Martyn. I am an Italian user, recently owner of a 318 f31. I find this Forum really interesting, I hope to be able to make my modest contribution.
Martyn