I have a problem with my BMW E46 320i with the M54b22 engine. I connected to the car using the ÎŜ†Ä program and reset the adaptation of all the control units. Now, the car won't start – the engine just cranks but doesn't start.
I know that I need to perform a basic adaptation to get the car running again, and then it will learn on its own. However, I don't know how to do this or which components need to be adapted.
Could you please help me with the adaptation process and let me know which components need to be adapted to get the car running properly again?

Hello everyone
I'm Isaac come from Taiwan

Hola soy Español y con muchas ganas de aprender algo de nuestros
Bmw,

Saludos Cordiales


Gracias por aceptarme en el foro.

Hi all....looking forward to learning how to code my F31.

Hi, 

I'm a beginner to coding my own BMW, i updated all modules to the latest version I had which went really smoothly/ 

After turning on the car and plugging it onto ÎŜ†Ä i noticed the HKFM_LS module needed coding again. On ėšÝ§ its showing the files under HKFM_LS

Picture attached.

When i try to add the CADF via coding "Detect CAF for SWE" i can find the file add add it in. When i then try to code i get the following error message.

Picture Attached and output. 

Can anyone give me a hand with this its driving me nuts i have tried everything. 

Thanks in advance.

Attached Files

Thumbnail(s)
       

  SZL_LWS inport code.txt (Size: 3.61 KB / Downloads: 3)

Greetings from Bavaria!

Nice to be here. Thx

Greetings from Germany!

Nice to be here. Thx

Moin Leute,
ich bin neu hier und habe eine Frage.
Ich habe ÎŜ†Ä+ installiert.
Wenn ich jetzt aber mein Fahrzeug in das Programm eingebe weil ich mir schon Reparatur Anleitung ansehen will ist der Bereich Fahrzeuginformation und Fahrzeug Behandlung aus gegraut.
Evtl kann mir ja einer von euch helfen wie ich das Freischalten kann.
Liebe Grüße,
Der hai

Attached Files

Thumbnail(s)
   

Have a 2016 F56 mini S having some issues and trying to reoslve.

Backsotry bought the car from Auto Auction came in without a DME.  I have cloned an ECU from another car with like motor to the car pulled ISN from BDC and installed and got the car running.

My issue is that it says Drivetrain malfunction DME says internal fault 1f2102 

Function release, power increase: not occurredFault Code Description
The diagnosis monitors enabling of a data status via SWT enabling code.
Fault monitoring conditions:
The fault is detected when a data status to be enabled has been programmed.Service Plan
- Release DME data with enabling code.
- Reprogram DME enabling code.
- Program DME correct data without enabling requirement.Fault Impact


I see one option on the car that I cant identify as a retorfit i Believe   shows up on FA as NPOW.  

My assumption is the car had a TUNE and they removed the Tuned DME before insruance took it.  

I have tried to code with ė-šÝ§ 3.36 to FA I believe I have all the steps right there but this issues still persists with Drive train malfunciton 

Any thoughts on things to try 

Hello all,

Some days ago, I flashed my G31 with ė-šÝ§.  I used ė-šÝ§ 3.36.2 for that purpose.
Before flashing, I made sure to backup FA and SVT (ist, soll, tal).

Today, I connected again to the vehicle with ė-šÝ§ 3.36.2, in order to make new backups of FA and SVT list.
This is when I noticed that my SVT tree only lists 19 ECUs instead of 22 ECUs.
When I compare the 2 SVT trees, I find these 3 ECUs missing in the current one:

- DCS3 -
- EPS2 -
- DME  -

Does anyone know what these ECUs are for ?
Is there any possibility to restore them via ė-šÝ§ ?


What should I do now, how to solve this problem?

Attached Files

Thumbnail(s)