G30
My map NBTevo_Q

Changing EGR/AGR Recirculation Rate

https://mega.nz/file/M4FDSChC#7QrExv9rR8...RxWlkbrbkw

Hello everybody, 
I am new to the group, and a new owner of a 535D F10.
Hoping to have a good time with you all.
regardsss

Hi from Houston, Texas

Hi everybody!

Nice to meet you all.

I just found out about this forum and I decided to jump in.
I'm dealing with cars since I was a just a little kid and then 20 years ago I discovered BMW. 
I was working at BMW OE dealership for seven years and today I work for one of OE suppliers, who is, among others, also supplying BMW.

If some of you will have some clutch issues or problems, feel free to ask, I know a few details about modern clutches and DMFs.

Regards from south east Europe!

Hi everyone, 

I want to retrofit an nbt evo id6 into my 2012 f21 equipped with a basic CIC without nav. I read some threads but I couldn't find anything that worked.

I have an nbt evo id6 headunit with a small screen and the touch controller. I also have an Enet cable and BU.

From what i've read I need to code my vin first, and then code the hu but i tried few month ago and it didn't work. 

Can someone explain the steps so i can do it correctly please.

Hello from The Netherlands.

I've been searching for a good F48 site....and i found it.

What a marvelous site is Bimmerscene.

Thank you.

Hello guys, i have a problem on F11 (with native CIC 07/2011) retrofitted EVO, ZGW1 flashed to ZGW2, replaced CAN1 to CAN2, Combox was removed, pin 13 bridged to pin 15 for RAD_ON. Car drains battery, measured 0.3Amp after car goes to sleep.
I`ve removed HU fuse, disconnected Amplifier and Diversity, still same thing. Most of the car`s modules was updated to newest i-Level.
I got 8021D4 error "Terminal 30F: no reset or deactivation due to no message or invalid signal (request term. 30F, 0x371, transmitter FRM)"
Any ideas?

Hi I guys about a year ago I did the live cockpit without mgu and 12.3 center screen display. Car went under construction for a car build so had to put In all the stock parts. Now several months later I can restore the cluster its stock in programming. I know the Tailights and center screen can be fixed.  Anybody willing to help.  I need figure out fa level and hwel data to complete the correct istep. Cluster will not show in ėšÝ§ untill it’s recovered or I step correctly with over flash

Hi, 
rain/light sensor was damaged after windshield change in my X5 G05. Got error in ÎŜ†Ä.
Bought new one, installed it and no error again. 
But I recognize that anything works wrong.
If you start car and it is bright, only daylight goes on, if its darker, laserlight goes on and if it is brighter again after that lights go off for one second and go on again, stay on but inside all light signs are off.
Same time I changed the sensor, I retrofit LASER LIGHT and coded car (BDC, KAFAS, FLM...) may be there is a connection between?
Some ideas ? What ecu is for auto light on/off?

Thx