HI!

I am a new user to this forum

Todays carlist: |
F11 535xd 
E70 40d
E39 
E83 



Vegtm

Hello,

I want to code a new entrynav2 headunit with wifi to my bmw g30.
Is this the correct procedure:

1. Clear swt with feature installer 

2. Code vin to headunit 

3. Code VO to headunit as default from bdc FA

4. Import FSC Pack 

Im unsure about the default coding to headunit, is this the correct way?

Thanks

HI thanks for letting me join i hope to be able to do some coding on my bmw's

Hey guys, I’ve been chasing down a 2a82 vanos code for a while. It’s a 2007 bmw 328i. I bought the car with extremely low torque rough idle and stalling issues with many codes but this was the one that stuck out to me regarding symptoms. I changed oil and replaced vanos solanoids the day I got it. That changed nothing. Then I checked timing and it was good, then I replaced the vanos gear, as well as checking oil pressure both good. I still have the codes, I replaced my camshaft sensors with new oe. Actually worse now, it was drives me before but isn’t now. Finally tonight I tried unplugging both solanoids and running the car and when doing that it started up great, ran for about 5 seconds then dipped down super hard from 1000 to 400 rpm. After that it jumped back up to 800. Right when the dip happened I got code 2a96 for crankshaft sensor tooth fault. After that it idled super rough slowly dipping till it stalled. Cleared codes and started again sand thing. 5 times in a row. Then I plugged back in vanos started up and that code didn’t come back, still ran terrible but now I had my 2a82 again instead. I’m thinking crankshaft sensor but I’ve gotten so many misleading codes so far so I wanted to ask here before I bought it.

im sorry if im posting it in the wrong thread but i have issues getting my FA VO it keeps saying that it cant read it due to it saying all the time that it cant read the E65 CAS2 all though it should only get the E60 the i integration is 09-06-520 so i assume pretty old as the car itself is 2004 01/11/2004 built
main issue is it doesnt want to connect to the car at all even through LMA

I have two F30’s.

One has folding mirrors with blindspot assistance, the other has standard none folding mirrors.

How hard would it be to swap them over?

Kind regards

MGU Engineering Tool OBD SOLUTION

APPLE CARPLAY, ANDROID AUTO, REGION CHANGE OVER OBD USING FEATURE INSTALLER.

•⁠  ⁠Removes component protection without need to upload 1AA FSC
•⁠  ⁠Clears FSCs
•⁠  ⁠FSC generator included to generate new set for retrofit
•⁠  ⁠Region change possible
•⁠  ⁠Remote access possible with Feature Installer after initial patch
•⁠  ⁠Unlock IPSec


Post/PM for Pricing and Info