Hi guys,

I'm relatively new to BMW cars. After purchasing a 225XE, I updated the GPS maps to 2025-2. I hope to learn a lot from such great experts as you.

Best regards.

i'm from denmark an do alot of work on E46 and retrofit . 

an as from today am trying ncs an ÏÑÞÀ . 

i hawe mostly bin making weiring looms

https://mega.nz/file/VxwVyJCR#Sf0aBQBfPs...qw3AMXf8MI

Hello friends.

If you can help, please help. 

I bought a license generator for ÎŜ†Ä 4.50.40. But unfortunately I can't find the installation files. I wanted to install it for myself. Please share a link to MEGA where I can download these installation files. I would be very grateful.

Hi everyone!

I've been fighting with ÎŜ†Ä installation for 2 days straight and now I need some help. 
I bought a separate laptop for BMW, re-installed window and at first I installed BMW Standalone tools and then I downloaded the ÎŜ†Ä 4.52.40 Standalone and Lite psdzdata 4.53.41 (Since I won't do coding, just diagnostics).
I'm using the ENET cable not K+DCAN.

After installing I noticed that it is extremely slow but looked like it is running. When connected to the car it read out the basic data just fined and then gave error "API-0013: INITIALIZATION ERROR". After studying forum I found this registry patch that should have fixed it but now I get the Error "Sec4Diag.OtherExceptions" and it freezes there.

So my 2 biggest concerns is - 1) How to get it properly running and scanning the car 2)How to make it work faster (I know that it should be a lot faster)

So maybe someone can help with detailed installation process, changes that need to be made etc? I remember BimmerGeeks time when I first installed Rheingold there was detailed pdf with all the setup files, for new ones I can't seem to find it.

Thanks in advance.

Hello guys! 
I'm new to BMW world but im ready to go  further with coding and everything else so I'm here to learn from you guys and help others in future.

I'm trying to retrofit my f11 HU entrynav to NBT high and i think i will be needing HU engineering tool so any ideas where to get it?

Thanks for this wonderful forum!

Best regards
RoYe

Hi , having difficulties to find a solution why only the driver door unlocks in my 2016 x5. I used the Bimmercode to set " Unlock doors automatically" to aktiv and pulling the door handle still opens only the driver door. I didn't find anything related  in the Expert mode. Never had any issues in my previous x5 models.
Any suggestions ? Thank you

Attached Files

Thumbnail(s)
   

Please Help me,

i updated my nbtEVO with ėšÝ§ I also selected ATM, but the Codings for the ATM doesnt backed up.
It is not a new ATM or HU... 

I also tried VCM codings? i think...

im using a VCX SE for BMW adapter

If i update the services. It says. not availble right now. In Service menu i also not able to see the GPS Version

Hello all i have issue i cannot read BMW E SERIES with ÎŜ†Ä, newer series work ( I use ENET CABLE FOR BOTH )
Thanks in advance

Greetings!

As per the title, I have a very strange issue with the DKOMBI2 on my 2017 G30. The car was originally equipped with 6WB from factory so no retrofits done.

I bought the car with the alpina display enabled but wanted to revert back to stock. Got ėšÝ§ 3.35 and ėšÝ§ Plus with full data.
I edited the cafd and disabled alpina display and everything worked OK. I later decided do dig into some more customization options (disabling the vehicle check and brake fluid service display + making the sport gauges gray). 
All worked fine as well. Then decided I want to try to the alpina display again, went back to do it. Coding went OK display changed. I left the car and went to work. When I got back to unlock it some hours later the cafd was corrupted.
And now I'm stuck with the cafd re-corrupting each time the car sleeps. I have tried every method I can think of to fix it but it wont stick.

I tried to modify my SVT and recode to factory.
I tried to dedect cafd for swe and inject it that way.
I also tried to modify svt_ist and before calculating svt_sol to trick a rewrite of btld,sfwl and cafd via TAL processing.

In each case the behavior of the cluster is the same. I can re-read SVT after doing the coding and the correct cafd will show. But as soon as I lock the car and let it sleep (or force a DKOMBI reboot via ėšÝ§) the cafd gets corrupted again.

ps: I also tried all of the above steps with ėšÝ§ 3.30, 3.34 and 3.35 both with and without launchers.

I have tried to do the coding with a connected battery charger, even with the engine running to ensure stable power to the battery. Also tried to buy and register a brand new battery but nothing helps. cafd will still get corrupted after car sleeps.

Alongside with this I started to get an issue where my vehicle inspection will say it expired on 11/2021 and regardless of what date I set it to both via idrive and tool32 it will still re-expire to the same 11/2021 date. I even tried to disable it via ÎŜ†Ä+ and it re-enables with an expired date of 11/2021 on its own.

It really seems something with the memory of my cluster is going bad and it wont allow data to be permanently stored into it.

All other car systems remain unaffected and problem free. I have also tried to code stuff to BDC2 and HU and they work fine. The issue happens only with the cluster. 

At this point I'm open to any ideas and suggestions as I'm starting to lean towards buying a virginized unit and replacing mine but would ideally like to avoid that cost.

Thank you in advance!

edit:
forgot to specify the full psdzdata I have is 4.53.41
and for ėšÝ§ 3.30 I use launcher pro 2.8.1.155
for 3.34/3/35 i use ėšÝ§ plus 3.8.1