Hi Everyone,

I have a coding issue with my retrofitted 456 option front driver comfort seat module ( originally seat was 459 ) after the dealer updated my software during an engine oil service

I tried the following step to VO code but no gain

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (ECU)=> Left-Click on GWS => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown (bottom) => Select OK => Right-Click on GWS (the ECU itself not the underlying CAFD) => Select CODE.

Here is the log file report after VO code failed

Caf'ssuchen>
TAL calculation started.
Locally NCD signature calculation started
Processing ncd signing finished
TAL execution started.
<>
Read SVT before TAL execution started.
Read SVT before TAL execution finished.
TAL execution started.
<ExecutionID=2025/02/06-21:41:06.763>
<[] prepareTALExecution started [PROGRESS]>
<[] prepareTALExecution finished [PROGRESS]>
<[] prepareVehicleForCoding started [PROGRESS]>
<[] prepareVehicleForCoding finished [PROGRESS]>
<[SM2 - 6D] prepareECUforCoding started [PROGRESS]>
<[] Errors during NCD generation for CAF cafd_00002259-022_002_010:
DataGroup ., Function .: More than one condition parameter is active: [., .] [THROWABLE]>
<[SM2 - 6D] There was an error during TAL execution, please check the log files. [WARN]>
<[SM2 - 6D] - [Exception - UNKNOWN] Errors during NCD generation for CAF cafd_00002259-022_002_010:
DataGroup ., Function .: More than one condition parameter is active: [., .]>
<[SM2 - 6D] finalizeECUCoding started [PROGRESS]>
<[SM2 - 6D] finalizeECUCoding finished [PROGRESS]>
<[] finalizeVehicleCoding started [PROGRESS]>
<[] finalizeVehicleCoding finished [PROGRESS]>
<[] finalizeTALExecution started [PROGRESS]>
<[] finalizeTALExecution finished [PROGRESS]>
<TAL execution finished [TAL_EXECUTION_FINISHED]>
TAL-Execution finished with status: "FinishedWithError".
TAL execution finished. Duration: "5s".
<>
Read SVT after TAL execution started.
Read SVT after TAL execution finished.
TAL execution finished.

the software update caused my electric second-row seat ( my car comes with third-row seat option 4UB ) switch malfunction as the driver seat just wont move forward to let the second-row seat backrest to fold down.

As final resolve, I VO code back original 459 and the second-row electric seat switch function back to normal, but ... now my driver seat cannot move at all now and I cant VO code the module as it kept showing " cdDeplo FinishedWithError , cafd ... Not Executable"


Appreciate if some expert could enlighten me here on the coding solution as I totally out of my mind now : (

Many thanksHi Everyone,

I have a coding issue with my retrofitted 456 option front driver comfort seat module ( originally seat was 459 ) after the dealer updated my software during an engine oil service

I tried the following step to VO code but no gain

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (ECU)=> Left-Click on GWS => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown (bottom) => Select OK => Right-Click on GWS (the ECU itself not the underlying CAFD) => Select CODE.

Here is the log file report after VO code failed

Caf'ssuchen>
TAL calculation started.
Locally NCD signature calculation started
Processing ncd signing finished
TAL execution started.
<>
Read SVT before TAL execution started.
Read SVT before TAL execution finished.
TAL execution started.
<ExecutionID=2025/02/06-21:41:06.763>
<[] prepareTALExecution started [PROGRESS]>
<[] prepareTALExecution finished [PROGRESS]>
<[] prepareVehicleForCoding started [PROGRESS]>
<[] prepareVehicleForCoding finished [PROGRESS]>
<[SM2 - 6D] prepareECUforCoding started [PROGRESS]>
<[] Errors during NCD generation for CAF cafd_00002259-022_002_010:
DataGroup ., Function .: More than one condition parameter is active: [., .] [THROWABLE]>
<[SM2 - 6D] There was an error during TAL execution, please check the log files. [WARN]>
<[SM2 - 6D] - [Exception - UNKNOWN] Errors during NCD generation for CAF cafd_00002259-022_002_010:
DataGroup ., Function .: More than one condition parameter is active: [., .]>
<[SM2 - 6D] finalizeECUCoding started [PROGRESS]>
<[SM2 - 6D] finalizeECUCoding finished [PROGRESS]>
<[] finalizeVehicleCoding started [PROGRESS]>
<[] finalizeVehicleCoding finished [PROGRESS]>
<[] finalizeTALExecution started [PROGRESS]>
<[] finalizeTALExecution finished [PROGRESS]>
<TAL execution finished [TAL_EXECUTION_FINISHED]>
TAL-Execution finished with status: "FinishedWithError".
TAL execution finished. Duration: "5s".
<>
Read SVT after TAL execution started.
Read SVT after TAL execution finished.
TAL execution finished.

the software update caused my electric second-row seat ( my car comes with third-row seat option 4UB ) switch malfunction as the driver seat just won't move forward to let the second-row seat backrest to fold down.

As a final resolve, I VO code back original 459 and the second-row electric seat switch function back to normal, but ... now my driver seat cannot move at all and I cant VO code the module as it kept showing " cdDeplo FinishedWithError , cafd ... Not Executable"


Appreciate if some expert could enlighten me here on the coding solution as I am totally out of my mind now : (

Many thanks

Hi there, anyone has issue with BU not opening at all ? application crashing :/

anyone know where log files are stored ?

Young mechanic will become pro

Ciao ragazzi, mi servono i file SQLiteDBs in italiano per ÎŜ†Ä+ 4.49.2x qualcuno può aiutarmi a trovare un link utile? Grazie

Hi, I recently imported personal BMW IX from USA to Europe and I am interested in conversion topics. It's my first BMW, so I am new at the BMW scene.

Hi guys thank  for having me.

Hello,

On my 2017 750i, I recently swapped out the Bowers & Wilkins Diamond Sound Amplifier with a used functional unit.  The sound is back now and the "Warning - No Tones" error on the display is gone.  However, I noticed the Ambient lights on all speakers and the Sky Lounge are now off.  The menu checkbox options are still available in the Internal Lighting settings but I am not able to check the option.

I used Bimmer Utility to code the amplifier to the vehicle.  BU automatically identified the un-coded amplifier, applied a CAFD, and saved it to the AMPT ECU.

Searching forums and the web, I have come to understand that the CAFD file should have the following options to activate the ambient lights after an amplifier replacement but I do not see these entries in the BU Editor or ė-šÝ§:

• Lautsprecher_Beleuchtung
  
• Interior_Lighting_Speaker
  
• Speaker_Ambient_Lighting
  
• Licht_Lautsprecher
  

Hey i downloaded the link for the ÎŜ†Ä P 3.72 But i cant get it to work i keep getting a " PLEASE INSTALL AND REGISTER ÍŠÞÍ ADMIN CLIENT. STARTING ÎŜ†Ä P IS NOT POSSIBLE. i DONT KNOW WHERE TO GO FROM HERE? PLEASE HELP ME

Hello Everybody,
I' m glad here to present me.
I' m from France but live and work in Germany.
I ve got 2 Children, und my son (5 years old) only speak about BMW 

I'm actually driving a 530 xD F11 from 2016, which i like, and I use to perform some kind of small Work on it, like öl or brake change, but I want to learn a little bit more now. That's why I 'm here.

I glad to read from you.

Bye
Benco54

I'm getting pi**ed off with this now!

My car (2009 35d) runs rough at 1300-1700rpm in normal auto mode, if I knock over to sport mode, the revs rise and the rough running disappears.

So far I've cleaned the egr valve, replaced map sensor and air filter. I've tried running MAF tests on ÎŜ†Ä but I can't get it to work properly.

I saw a post somewhere on how to use ÎŜ†Ä to check for carbon build up but that's not an option on my version.

Any ideas what to try next?