Hi everyone,

I recently upgraded my system from ID4 to ID6. Everything seems to be working fine — the screen works perfectly while driving and doesn't crash or turn off randomly. However, I’m facing a weird issue that only happens occasionally.
Sometimes (maybe once a week, sometimes after almost 3 weeks), when I come back to the car after it's been locked and off for a while, the screen doesn’t power on at all. The only way to bring it back is by holding the power button for about 30 seconds, and then it starts up normally and works fine again. This is the only issue — and it’s rare, but annoying.

I'm wondering if I missed something in the coding or forgot to change a setting during the upgrade. Has anyone experienced this before or knows what might be causing it?

Any advice or suggestions would be much appreciated!

Thanks in advance!

Hi. Please help me extract isn from MG1

Attached Files

  x7 white ����������_eRom.zip (Size: 115.56 KB / Downloads: 9)

Hey guys

So I have installed Xdelete to a 540i because the transfer case was showing an end of life error message in the idrive. I thought this would 'delete' the xdrive system from the car and clear this error. I was wrong. It remained! Turns out after a bit of digging this is something Xdelete acknowledges as something its programme will not be able to clear.

I went through ÎŜ†Ä and did an oil service calibration and also a calibration of the transfer case but it fails the programme when it tries to adjust the motor. So this must be why it displays and end of life fault code.

I have access to ėšÝ§ and Protool so was wondering if there was a way of getting rid of this Idrive message from the car. Driving wise everything is perfectly fine. Its just this annoying message which displays every time the car starts up.

Thanks for any input or advice

Hello,

I am looking for a working .BIN file compatible with a BMW E82 120 LCI (2011) in order to reflash my FRM module.
My current module is an FRM3R PL2 (part number 9251488) and it seems to be corrupted or non-functional 
Could you please provide me with a functional BIN file for this specific configuration? It would be greatly appreciated, as I would like to reflash it and restore full functionality.
Thank you in advance for your help.

Attached Files

Thumbnail(s)
   

Hello everyone from Italy  

Hi everyone 
I am new in programming bmw . But have a good experience in programming and coding anoter electronics software and digital design languages.

Good to join the community!

I've just bought my second BMW after my previous E91 died.  Now proud owner of a 2014 330d M Sport Xdrive ☺️
.
Joined up as was interested in learning how to get my Nav software updated from 2014 to 2025. ?

Hi, just trying to find a way to code a uk? Dme/cas to what my old mx one was before it died on me.

Hi everyone!
I finally got my childhood dream car — a 2011 E90 325i with a 3000cc engine!
The car was imported from Japan.
I'll be sharing the modifications I need to make (like headlights, etc.) to get it TÜV-approved here in Germany.
Knowledge grows when shared, so I hope this helps others too!

Hello everyone, I'm Jack from Canada and my car is 2016 428i (F32, N26 engine). Try to learn something here!