I literally cannot find any information in regards to the NBT v850 eeprom chip and much less find a dump online for it. Context to why I’m looking is because during an update of my headunit the bootloader flash failed at around 20% completion which was completely unrecoverable. So now I’m trying to repair the headunit and tracked it down to the v850 chip but cannot find any information regarding this, only NBT EVO clearing and reflashing v850 and dumps for NBT EVO only. Not a single post or publicly available information in regards to NBT v850.

That all said, does any one know what is needed, and or have the v850 EEPROM dump for a NON EVO hu_nbt1, NBT ID4

Thanks for all the help getting me this far.  Im trying to activate the Sirius radio in my 2019 F60 Countryman SE.  I have the Sat Ready package, and I ordered an FSC from bmwcustomretrofit.com.  Got the FSC bundle which included the FSC and the cert.  

First I tried to use ÎŜ†Ä to retrofit the Sat Radio option like a dealer would.  When it prompted me to import the FSC, i pointed it at the folder.  The plan ran fine, but the measures plan completed and said it couldn't activate the FSC.  It did enable the Sat Radio function in my Entrynav2 and disable the Sat Prep package (I have option 655 now instead of 693), but the tuner wont initialize without activating the FSC.  I tried to re-run the measures plan, but it would not accept the FSC.

So I broke out ėšÝ§ and tried to activate the FSC that way.  First tried it in comfort mode, which loaded the FSC, but not the cert.  Then in expert mode I tried to send the FSC cert on its own, but got an error C057.

I think my current state is that I have the headunit coded (thanks to ÎŜ†Ä), and the FSC loaded/accepted (I can see it if I check the FSC status for App ID 0x6F on the headunit in ėšÝ§), but the FSC cert still shows "status not available".  And I dont think it will work with both the cert and the FSC active?

Any guidance would be appreciated!

Hi guys! I drive a 2017 G30 530i. Looking forward to picking up a thing or 2 from you geniuses out here!

Having trouble coding the HU, I already programmed the software to the I version successfully. The CAFD files are 255 255 255. The ones I need are HU_MGU2_0x63
cafd_00007d8d-000_151_004
cafd_0000945e-000_060_011
cafd_000095af-000_008_001
cafd_0000b579-000_005_010  

ACTIONS_REPORT_ENTRY
File for "cafd_00007d8d-000_151_004" not found! [C012]
File for "cafd_0000945e-000_060_011" not found! [C012]
File for "cafd_000095af-000_008_001" not found! [C012]
File for "cafd_0000b579-000_005_010" not found! [C012]

I have the latest data full downloaded and installed.

Any clue?

Hello everyone.

I know this is not a question to ask here on the F series forum ,but i think the best nolage is on this forum so i am going to ask it.
I hope someone can help me with this problem i am having on my sons BMW X3 M40i.
The M40i has a towbar model ORIS but when a trailer is attached I get the message "trailer detected," but the reverse sensors don't deactivate, and the warning continues to beep. Couldn't this be coded so that the sensors deactivate when a trailer is attached to the towbar?
Sorry that i ask this question here.
Best regards

Hello friend's, i'm here to learn something new and help someone with my knowledge. Got my dream car about 1 month ago. M5 F90 LCI.

Hey!

Long time cybersec/tech and BMW guy.

Never needed to do much more than the occasional coding but now totally fed up of looking at 2/3rds Carplay on my F90 so i'm tooling up with ė-šÝ§ etc to upgrade from NBT evo_W20204I.

Happy to be here!